Belden Hirschmann EAGLE40-03 Referenzhandbuch Seite 584

3 8 Signa l Cont a c t
3 8 .1 signa l-c ont a c t
Configure the signal contact settings.
3 8 .1 .1 signa l-c ont a c t m ode
Configure the Signal Contact mode setting.

Mode: Global Config Mode

Privilege Level: Administrator

Format: signal-contact <P-1> mode <P-2>
Parameter Value
signal contact no.
P-1
manual
P-2
monitor
device-status
security-status
dev-sec-status
3 8 .1 .2 signa l-c ont a c t m onit or link -fa ilure
Sets the monitoring of the network connection(s).

Mode: Global Config Mode

Privilege Level: Administrator

Format: signal-contact <P-1> monitor link-failure
Parameter Value
P-1 signal contact no.

no signa l-c ont a c t m onit or link -fa ilure
Disable the option

Mode: Global Config Mode

Privilege Level: Administrator

Format: no signal-contact <P-1> monitor link-failure
3 8 .1 .3 signa l-c ont a c t m onit or e nvm -not -in-sync
Sets the monitoring whether the external non-volatile memory device is in sync with the running configuration.

Mode: Global Config Mode

Privilege Level: Administrator

Format: signal-contact <P-1> monitor envm-not-in-sync
Parameter Value
signal contact no.
P-1

no signa l-c ont a c t m onit or e nvm -not -in-sync
Disable the option

Mode: Global Config Mode

Privilege Level: Administrator

Format: no signal-contact <P-1> monitor envm-not-in-sync
3 8 .1 .4 signa l-c ont a c t m onit or e nvm -re m ova l
Sets the monitoring of the external non-volatile memory device removal.

Mode: Global Config Mode

Privilege Level: Administrator

Format: signal-contact <P-1> monitor envm-removal
Parameter Value
signal contact no.
P-1
RM CLI EAGLE40-03
Release 04.1 03/2021
Meaning
The signal contact's status is determined by the associated manual setting
(subcommand 'state').
The signal contact's status is determined by the associated monitor settings.
The signal contact's status is determined by the device status.
The signal contact's status is determined by the security status.
The signal contact's status is determined by the device status and security
status.
Meaning
Meaning
Meaning
137