Belden Hirschmann EAGLE40-03 Referenzhandbuch Seite 520

delete: Delete a NSSA.
modify: Modify the parameters of a NSSA.
translator: Configure the NSSA translator related parameters.
role: Configure the NSSA translator role.
stability-interval: Configure the translator stability interval for the NSSA, in seconds.
summary: Configure the import summary for the specified NSSA.
no-redistribute: Configure route redistribution for the specified NSSA.
default-info: Configure the nssa default information origination parameters.
originate: Configuration whether a Type-7 LSA should be originated into the NSSA.
[metric]: Configure the metric for the NSSA.
[metric-type]: Configure the metric type for default information.
Parameter Value
P-1 A.B.C.D
summary-link
P-2
nssa-external-link
A.B.C.D
P-3
P-4 a.b.c.d
P-5 summary-link
nssa-external-link
A.B.C.D
P-6
a.b.c.d
P-7
P-8 advertise
do-not-advertise
summary-link
P-9
nssa-external-link
A.B.C.D
P-10
P-11 a.b.c.d
P-12 0
0
P-13
no-area-summary
P-14
send-area-summary Enable the router to send area link state advertisement summaries. The router
0..16777215
P-15
0
P-16
A.B.C.D
P-17
P-18 A.B.C.D
P-19 A.B.C.D
none
P-20
simple
md5
P-21 string
P-22 0..255
1..65535
P-23
1..65535
P-24
0..3600
P-25
P-26 0..3600
P-27 import-nssa
import-external
P-28
always
P-29
candidate
P-30 0..65535
P-31 1..16777214
ospf-metric
P-32
comparable-cost
non-comparable
RM CLI EAGLE40-03
Release 04.1 03/2021
Meaning
IP address.
Configure summary links LSDB type optional mode.
Configure nssa external link LSDB type optional mode.
IP address.
IP subnet mask.
Configure summary links LSDB type optional mode.
Configure nssa external link LSDB type optional mode.
IP address.
IP subnet mask.
Set as advertise.
Set as do-not-advertise.
Configure summary links LSDB type optional mode.
Configure nssa external link LSDB type optional mode.
IP address.
IP subnet mask.
Configure the TOS (0 is for Normal Service).
Configure the TOS (0 is for Normal Service).
Disable the router from sending area link state advertisement summaries.
floods LSAs within the area using multicast. Every topology change starts a
new flood of LSAs.
Configure the default cost.
Configure the TOS (0 is for Normal Service).
IP address.
IP address.
IP address.
Configure the authentication type as none (Key and key ID is not required).
Configure the authentication type as simple (Key ID is not required).
Configure the authentication type as md5 for the interface.
<key> Configure the authentication key.
Enter a number in the given range.
Enter a number between 1 and 65535
Enter a number between 1 and 65535
Enter a number in the given range.
Enter a number in the given range.
Configure the area as NSSA only.
Change the area to support external LSAs also.
Configure the NSSA translator role as always. When used as a border router,
the router translates LSAs regardless of the translator states of the other
NSSA border routers.
Configure the NSSA translator role as a candidate. When used as a border router,
the router participates in the translator election process. The router
maintains a list of reachable NSSA border routers.
Enter a number between 0 and 65535
Configure the metric value.
Set the metric type as ospf Metric.
Set the metric type as comparable cost.
Set the metric type as non-comparable.
73