Belden Hirschmann EAGLE40-03 Referenzhandbuch Seite 482


no de vic e -st a t us m onit or pow e r-supply
Disable the option

Mode: Global Config Mode

Privilege Level: Administrator

Format: no device-status monitor power-supply <P-1>
7 .1 .6 de vic e -st a t us t ra p
Configure the device to send a trap when the device status changes.

Mode: Global Config Mode

Privilege Level: Administrator

Format: device-status trap

no de vic e -st a t us t ra p
Disable the option

Mode: Global Config Mode

Privilege Level: Administrator

Format: no device-status trap
7 .2 devic e -st at us
Configure various device conditions to be monitored.
7 .2 .1 de vic e -st a t us link -a la rm
Configure the monitor settings of the port link.

Mode: Interface Range Mode

Privilege Level: Administrator

Format: device-status link-alarm

no de vic e -st a t us link -a la rm
Disable the option

Mode: Interface Range Mode

Privilege Level: Administrator

Format: no device-status link-alarm
7 .3 show
Display device options and settings.
7 .3 .1 show de vic e -st a t us m onit or
Display the device monitoring configurations.

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show device-status monitor
7 .3 .2 show de vic e -st a t us st a t e
Display the current state of the device.

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show device-status state
7 .3 .3 show de vic e -st a t us t ra p
Display the device trap information and configurations.

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show device-status trap
RM CLI EAGLE40-03
Release 04.1 03/2021
35