Belden Hirschmann EAGLE40-03 Referenzhandbuch Seite 567

Parameter Value
P-10 icmp
igmp
ipip
tcp
udp
esp
ah
any
1..4042
P-11
P-12 0..7
P-13 string
P-14 0..10000000
0..128
P-15
pps
P-16
kbps
P-17 0..255
enable
P-18
disable
enable
P-19
disable

no pa c k e t -filt e r l2 rule m odify
Disable the option

Mode: Global Config Mode

Privilege Level: Operator

Format: no packet-filter l2 rule modify action [src-mac] [dst-mac] [src-ip]
[sourceport] [dest-ip] [destport] [ethertype] [proto] [vlan] [assign-queue]
[description] [rate-limit] [tos] [log <P-18>] [trap <P-19>]
3 0 .1 .1 9 pa c k e t -filt e r l2 rule de le t e
Deletes a rule from L2 rule table.

Mode: Global Config Mode

Privilege Level: Operator

Format: packet-filter l2 rule delete <P-1>
Parameter Value
1..999
P-1
3 0 .1 .2 0 pa c k e t -filt e r l2 rule e na ble
Enables a rule from L2 rule table.

Mode: Global Config Mode

Privilege Level: Operator

Format: packet-filter l2 rule enable <P-1>
Parameter Value
1..999
P-1
3 0 .1 .2 1 pa c k e t -filt e r l2 rule disa ble
Disables a rule from L2 rule table.

Mode: Global Config Mode

Privilege Level: Operator

Format: packet-filter l2 rule disable <P-1>
Parameter Value
1..999
P-1
3 0 .1 .2 2 pa c k e t -filt e r l2 if a dd
Adds an interface to a L2 firewall rule.

Mode: Global Config Mode

Privilege Level: Operator

Format: packet-filter l2 if add <P-1> <P-2> <P-3> <P-4> <P-5>
Parameter Value
P-1 port
vlan
1..4042
P-2
120
Meaning
Internet Control Message Protocol
Internet Group Management Protocol
IP-within-IP Encapsulation Protocol
Transmission Control Protocol
User Datagram Protocol
Encapsulating Security Protocol
Authentication Header
Any of the above
Enter a VLAN ID in the given range.
Enter a Queue ID in the given range.
Rule description/name
Committed rate value, specified in kbps or pps.
Committed burst size value, specified in kbytes or pps.
Packets per second.
kbytes per second.
Specify the IP TOS bits to match.
Enable logging when applying the rule
Do not log applying the rule
Enable sending a trap when applying the rule
Do not send a trap when applying the rule
Meaning
Rule index
Meaning
Rule index
Meaning
Rule index
Meaning
Interface type to use is physical interface.
Interface type to use is L2 VLAN.
Interface ID for rule assignment.
RM CLI EAGLE40-03
Release 04.1 03/2021