Belden Hirschmann EAGLE40-03 Referenzhandbuch Seite 499

1 0 .1 .2 2 dpi dnp3 profile a dd
Adds a profile to the DPI DNP3 profile table.

Mode: Global Config Mode

Privilege Level: Operator

Format: dpi dnp3 profile add <P-1> [description <P-2>] [function-code-list <P-3>]
[default-object-list <P-4>] [sanity-check <P-5>] [crc-check <P-6>] [outstation-
packets-check <P-7>] [reset-tcp-check <P-8>]
[description]: Profile description/name for the DPI DNP3 profile.
[function-code-list]: Function code list. A function code has the syntax 'val'. Function codes are separated
by a comma.
[default-object-list]: Object entries to be included from Default white list.
[sanity-check]: Sanity check including format and specification.
[crc-check]: CRC verification for DNP3 data link layer frames.
[outstation-packets-check]: Check the DNP3 data packets originating at an outstation.
[reset-tcp-check]: Reset the TCP connection in case of a protocol violation or if the plausibility check leads
to errors.
Parameter Value
1..32
P-1
string
P-2
0..255
P-3
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
129
130
131
P-4 1..317
1..317
none
all
P-5 enable
disable
enable
P-6
disable
52
Meaning
DNP3 profile index.
Profile description/name for the DNP3 profile.
Function codes for the DNP3 profile.
Confirm
Read
Write
Select
Operate
Direct Operate
Direct Operate-No Response Required
Freeze
Freeze-No Response Required
Freeze Clear
Freeze Clear-No Response Required
Freeze At Time
Freeze At Time-No Response Required
Cold Restart
Warm Restart
Initialize Data
Initialize Application
Start Application
Stop Application
Save Configuration
Enable Unsolicited Messages
Disable Unsolicited Messages
Assign Class
Delay Measurement
Record Current Time
Open File
Close File
Delete File
Get File Information
Authenticate File
Abort File Transfer
Activate Configuration
Authenticate Request
Authenticate Request-No Acknowledgement
Response
Unsolicited Response
Authentication Response
Comma separated index values e.g 1,2,3.
Comma separated index and range of index values e.g 1-10,120-300.
'none' to exclude all default object list entries.
'all' to include all default object list entries.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
RM CLI EAGLE40-03
Release 04.1 03/2021