Belden Hirschmann EAGLE40-03 Referenzhandbuch Seite 524

Parameter Value
out
P-1
P-2 connected
static

no ip ospf dist ribut e -list
Disable the option

Mode: Global Config Mode

Privilege Level: Operator

Format: no ip ospf distribute-list <P-1> <P-2>
2 0 .1 .1 8 ip ospf de fa ult -info origina t e
Originate the OSPF default information.

Mode: Global Config Mode

Privilege Level: Operator

Format: ip ospf default-info originate [always] [metric <P-1>] [metric-type <P-2>]
[always]: Always advertise the 0.0.0.0/0.0.0.0 route information.
[metric]: Configure the metric for default information.
[metric-type]: Configure the metric type for default information.
Parameter Value
1..16777214
P-1
P-2 external-type1
external-type2

no ip ospf de fa ult -info origina t e
Disable the option

Mode: Global Config Mode

Privilege Level: Operator

Format: no ip ospf default-info originate [always] [metric <P-1>]
2 0 .2 ip
IP interface commands.
2 0 .2 .1 ip ospf ope ra t ion
Enable or disable OSPF on port.

Mode: Interface Range Mode

Privilege Level: Operator

Format: ip ospf operation

no ip ospf ope ra t ion
Disable the option

Mode: Interface Range Mode

Privilege Level: Operator

Format: no ip ospf operation
2 0 .2 .2 ip ospf a re a -id
Configure the area ID that uniquely identifies the area to which the interface is connected.

Mode: Interface Range Mode

Privilege Level: Operator

Format: ip ospf area-id <P-1>
Parameter Value
P-1 A.B.C.D
2 0 .2 .3 ip ospf link -t ype
Configure the OSPF link type.

Mode: Interface Range Mode

Privilege Level: Operator

Format: ip ospf link-type <P-1>
RM CLI EAGLE40-03
Release 04.1 03/2021
Meaning
Configure as out to re-distribute routes with ACL rules
Select the source protocol as connected.
Select the source protocol as static.
Meaning
Configure the metric value.
Set the metric type for default information as external type-1. The type 1
value sets the metric to the sum of the internal and external OSPF metrics.
Set the metric type for default information as external type-2. The type 2
value sets the metric to the sum of external OSPF metrics from the source AS
to the destination AS.
Meaning
IP address.
77