Belden Hirschmann EAGLE40-03 Referenzhandbuch Seite 512

1 6 I nt e rfa c e
1 6 .1 shut dow n
1 6 .1 .1 shut dow n
Enable or disable the interface.

Mode: Interface Range Mode

Privilege Level: Operator

Format: shutdown

no shut dow n
Disable the option

Mode: Interface Range Mode

Privilege Level: Operator

Format: no shutdown
1 6 .2 a ut o-ne got iat e
1 6 .2 .1 a ut o-ne got ia t e
Enable or disable automatic negotiation on the interface. The cable crossing settings have no effect if auto-
negotiation is enabled. In this case cable crossing is always set to auto. Cable crossing is set to the value chosen
by the user if auto-negotiation is disabled.

Mode: Interface Range Mode

Privilege Level: Operator

Format: auto-negotiate

no a ut o-ne got ia t e
Disable the option

Mode: Interface Range Mode

Privilege Level: Operator

Format: no auto-negotiate
1 6 .3 a ut o-pow e r-dow n
1 6 .3 .1 a ut o-pow e r-dow n
Set the auto-power-down mode on the interface.

Mode: Interface Range Mode

Privilege Level: Operator

Format: auto-power-down <P-1>
Parameter Value
auto-power-save
P-1
no-power-save
1 6 .4 c a ble -c rossing
1 6 .4 .1 c a ble -c rossing
Cable crossing settings on the interface. The cable crossing settings have no effect if auto-negotiation is enabled.
In this case cable crossing is always set to auto. Cable crossing is set to the value chosen by the user if auto-
negotiation is disabled.

Mode: Interface Range Mode

Privilege Level: Operator

Format: cable-crossing <P-1>
RM CLI EAGLE40-03
Release 04.1 03/2021
Meaning
The port goes in a low power mode.
The port does not use the automatic power save mode.
65