Belden Hirschmann EAGLE40-03 Referenzhandbuch Seite 521


no ip ospf a re a
Disable the option

Mode: Global Config Mode

Privilege Level: Operator

Format: no ip ospf area <P-1> range add modify delete add delete stub add modify
summarylsa default-cost delete virtual-link add delete modify authentication
type key key-id hello-interval dead-interval transmit-delay retransmit-interval
nssa add delete modify translator role stability-interval summary no-
redistribute default-info originate [metric] [metric-type]
2 0 .1 .2 ip ospf t ra pfla gs a ll
Set all trapflags at once.

Mode: Global Config Mode

Privilege Level: Operator

Format: ip ospf trapflags all <P-1>
Parameter Value
P-1 [cr]

no ip ospf t ra pfla gs a ll
Disable the option

Mode: Global Config Mode

Privilege Level: Operator

Format: no ip ospf trapflags all <P-1>
2 0 .1 .3 ip ospf ope ra t ion
Enable or disable the OSPF admin mode. When enabled, the device initiates the OSPF process if the OSPF
function is active on at least one interface.

Mode: Global Config Mode

Privilege Level: Operator

Format: ip ospf operation

no ip ospf ope ra t ion
Disable the option

Mode: Global Config Mode

Privilege Level: Operator

Format: no ip ospf operation
2 0 .1 .4 ip ospf 1 5 8 3 c om pa t a bilit y
Enable or disable the 1583compatibility for calculating routes external to the autonomous system. When enabled,
the router is compatible with the preference rules defined in RFC1583, section 16.4.

Mode: Global Config Mode

Privilege Level: Operator

Format: ip ospf 1583compatability

no ip ospf 1 5 8 3 c om pa t a bilit y
Disable the option

Mode: Global Config Mode

Privilege Level: Operator

Format: no ip ospf 1583compatability
2 0 .1 .5 ip ospf de fa ult -m e t ric
Configure the default metric for re-distributed routes, when OSPF redistributes routes from other protocols.

Mode: Global Config Mode

Privilege Level: Operator

Format: ip ospf default-metric <P-1>
Parameter Value
P-1 1..16777214

no ip ospf de fa ult -m e t ric
Disable the option

Mode: Global Config Mode

Privilege Level: Operator

Format: no ip ospf default-metric <P-1>
74
Meaning
Enable the Bit.
Meaning
Configure the default metric for redistributed routes.
RM CLI EAGLE40-03
Release 04.1 03/2021