Medfølgende Monteringsdele; Care Of Your Opener - Chamberlain LiftMaster 1000A Anleitung

33 REPLACEMENT PARTS
171A543
158A49
171A498
216A206
41C67
41B5348
171A479
37D117-2
41C5392
171A384-8
41C5350-5 (60kg)
41C5350-8 (80kg)
171A384
41C5350-2 (100kg)
171A545
108D56
171A320

CARE OF YOUR OPENER

When properly installed, opener will provide high
performance with a minimum of maintenance. The
opener does not require additional lubrication.
Limit and Force Settings: These settings must be
checked and properly set when opener is installed.
Weather conditions may cause some minor changes in
the door operation, requiring some re-adjustments,
particularly during the first year of operation.
Refer to Setting the Limits and Force on page 10.
Follow the instructions carefully and repeat the safety
reverse test after any adjustment.
Remote Control: The remote control may be secured
to a car sun visor with the clip provided. Additional
MAINTENANCE OF YOUR OPENER
Once a Month:
• Repeat safety reverse test. Make any necessary
adjustments.
• Manually operate door. If it is unbalanced or binding,
call for professional garage door service.
• Check to be sure door opens and closes fully. Set
Limits and/or Force if necessary.
114A2910B-GB
31D525
28A95
26B66-2 (Schuko)
26B62-3 (UK)
26B63 (Swiss cord)
26B72 (Australia & China)
26B83 (Danish)
41B4375-3
171A315
41B5351-5
41A5696-2b (60kg)
41A5696-4b (80kg, 100kg)
41D701-2 (60kg)
41D605
(80kg, 100kg)
41A5443-5 (60kg)
41A5443-9 (80kg)
41A5443-10 (100kg)
remotes can be purchased at any time for use in all
vehicles using garage. Refer to Accessories. Any new
remotes must be programmed into the opener.
Remote Control Battery: The lithium batteries should
produce power for up to 5 years. If transmission range
lessens, replace battery .
To Change Battery: To replace batteries, use the visor
clip or screwdriver blade to pry open the case. Insert
batteries positive side up. To replace cover, snap shut
along both sides. Do not dispose of the old battery with
household waste. Take batteries to a proper disposal
center.
Once a Year:
• Oil door rollers, bearings and hinges. The opener does
not require additional lubrication. Do not grease the
door tracks.
• GREASE THE RAIL AND THE TROLLEY.
13-GB
3
MEDFØLGENDE MONTERINGSDELE
(1) Sekskantskrue (2)
(2) Bolt m. hul til sikringsring (1)
(3) Bræddebolt (2)
(4) Franske skruer (8)
(5) Pladeskruer (2)
(6) Bolt m. hul til sikringsring (2)
(7) Snor
(8) Håndgreb
(9) Ledningsholdere (10)
(10) Dyvel (2)
8
7
10
Inden du begynder:
1. Kontroller væggen og loftet over garageporten. Konsollen til fastgørelsen af løbeskinnen skal monteres solidt
og sikkert på selvbærende bygningsdele.
2. Er loftet i garagen pudset eller på anden måde beklædt? I så fald skal der måske anvendes specialdyvler eller
andre dele (medfølger ikke) til monteringen.
3. Afhængigt af garageportens konstruktion kan det være nødvendigt at montere en speciel portarm.
41D163
4. Er der ud over selve garageporten også en ekstra-indgang til garagen? Hvis der ikke er nogen ekstra-indgang
til garagen, kan det stærkt anbefales at montere en ekstern nødudløser, model 1702E.
4 Den færdige installation
Mens du er i gang med at samle, montere og justere systemet, kan det være en god hjælp fra tid til anden at
foretage en sammenligning med tegningen af den færdigmonterede installation.
(1) Fastgørelsesholder
(2) Holder for
kabelføringsrulle
(3) Slæde
(4) Skinne
(5) Kæde/tandrem
(6) Hængekonsol
(7) Netledning
(8) Garageportåbner
(11) Betondyvel (6)
(12) Fjederskive (5)
(13) Sekskantmøtrik (5)
(14) Sikringsring (3)
(15) Løbeskinnefedt (1)
(16) Kontramøtrik (1)
(17) Metrisk selvskærende fransk skrue (4)
(18) Sekskantskrue (3)
(19) Fjeder (2)
(20) Stopbolt
2
1
9
11
3
12
20
19
(9) Lampeafskærmning
(10) Snor og håndgreb til
1 2
manuel
nødfrakobling
14
(11) Buet portarm
(12) Lige portarm
13
(13) Portbeslag og plade
(14) Portoverliggerbeslag
(15) Frakoblingsarm på
slæde
3-DK
6
15
5
4
16
13
14
17
18
7
4
3
5
6
11
9
12
10
8
15
10
114A2910B-DK