Automatic Updates - Canton Smart Soundbar 10 Kurzanleitung

Note:
• In a home theatre setup, the Soundbar 10 is always the „master speaker",
all other speakers are defined as „slave speakers". and controlled by the
Sounbar 10.

AUTOMATIC UPDATES

After you have connected the Soundbar 10 to the network, firmware updates
are executed automatically. After each connection to the power supply and at
regular intervals (also in standby mode), the Soundbar 10 searches for an up-
date and installs this, if available. The LED flashes green/red during the update
and the display first shows „DOWNLOADING", then „UPDATING". During this
time the Soundbar 10 is not operable.
To do this, the Soundbar 10 must have been connected to the network router
via the Google Home app or an iOS device (by use of WLAN) or alternatively
by a network cable (by use of LAN).
Attention:
• Do NOT disconnect the Soundbar 10 from the power supply during an
update process!
Note:
• The Soundbar 10 contains a multitude of other great functions. All settings
can be found in the detailed instruction manual. This can be found under:
www.canton.de/manual/soundbar10
English
3 4 5