Firmware Updates Via Usb Stick - Canton Sound M Kurzanleitung

FIRMWARE UPDATES VIA USB STICK

The Sound M offers you the possibility of updating the firmware via an USB
memory stick. With such an update new functions or adaptations to other
devices can be implemented and/or firmware faults (bugs) can be corrected.
During the update process, the Sound M is not operable!
WARNING:
Do not disconnect the Sound M from the power supply during an update!
To perform a firmware update, please proceed as follows:
Open the product page of the Sound M at www.canton.de/en and check
1
for the latest firmware available under the section „Downloads" in the form
of a packed ZIP file. The relating manual for this firmware can also be down-
loaded there.
Find out the firmware version of your Sound M: To do this, enter the main
2
menu by pressing the menu button „M". Now, use the „ / " buttons to
select the item „System Info" [INF] and confirm it with the „OK" button.
Confirm the first menu item „Firmware Info" [FWI] with „OK". If the firm-
ware displayed under „MCU" [MCU] is lower and therefore older than the
version available on the Canton homepage, we recommend you to perform
the firmware update on your Sound M.
Open the ZIP file and unpack all files contained into the root directory of an
3
empty FAT32 formatted USB memory stick (with USB-A connector).
Disconnect your Sound M from the mains for at least 40 seconds, then
4
insert the USB stick with the files into the USB connector on the back of the
Sound M and reconnect it to the mains.
Now, the Sound M executes the update automatically. The update is only
5
completed after the Sound M has returned to standby or its normal opera-
ting state and responds to the remote control (after approx. 21/2-3 min.).
Remove the USB memory stick (only) now.
6
English
3 3 7