Connection To Tv Device - Canton Smart Soundbar 10 Kurzanleitung

English

CONNECTION TO TV DEVICE

HDMI (recommended)
®
Connect a HDMI
1
the Soundbar 10 to the HDMI IN (eARC/ARC) input on your TV.
Now select the input [TV] by the Smart-remote using the up or down
2
arrow key ( / ).
Notes:
• A HDMI connection supports digital audio and video with a single cable.
®
It is the best option to connect your Soundbar 10.
• If your TV features a HDMI
TV internal audio through your Soundbar 10 by using this HDMI
• This HDMI
vices to the Soundbar 10 inputs to display on your TV.
• In this case, activate CEC mode on your TV. CEC (Consumer Electronics
Control) is a feature that allows compatible devices to be controlled from
a single remote control. For details, refer to the instruction manual of your
TV.
Optical digital input (alternative)
Connect the input OPTICAL at the Soundbar 10 to the OPTICAL OUT
1
connector of your TV with an optical cable.
On the Smart-remote, use the up and down arrows ( / ) to select the
2
input [CD].
Note:
• Make sure you have removed the protective caps from both ends of the
optical cable.
36
cable from the HDMI OUT (ARC) output on the back of
®
ARC/eARC connector, you can enjoy also the
®
connection is required if you intend to connect other video de-
®
cable.
®