Pairing Wireless Speakers - Canton Smart Soundbar 10 Kurzanleitung

English
Note:
• To delete the settings or a playlist from a preset button, please press and
hold the relating button for 10 seconds until the corresponding preset
[P1], [P2] or [P3] is shown in the display rapidly flashing.

PAIRING WIRELESS SPEAKERS

The Soundbar 10 offers you the possibility to pair up to 7 Canton Smart
Speakers wirelessly to an up to 5.1.2 home theater system.
Attention:
• Before pairing a Canton Smart Speakers to Soundbar 10, please make sure
that the Smart Speaker to be newly paired has been disconnected from
the power supply for minimum 30 seconds.
Pairing Smart Speakers wirelessly:
Enter the main menu by pressing the „M" button. Select the menu item
1
„Wireless Setup" [WIS] using the up or down arrow ( / ) and press „OK".
Confirm the first item „Wireless Speaker Pairing" [WSP] with the „OK"
2
button. Now, select the speaker to be connected (paired) using the up or
down arrow ( / ) and confirm your selection with the „OK" button.
After „Pairing"
3
speaker display, plug the power cord of the (new) speaker to be connected
into the power outlet and/or turn on the power switch (if present). After a
successful pairing process the On-screen display shows „Connected" and
the diplay of the Soundbar 10 as well as the display of the slave speaker
indicates [CON].
44
is shown on the TV screen and [PIR] is indicated on the