Automatic Updates - Canton Smart Soundbar 9 Kurzanleitung

Note:
• To delete a playlist and/or the settings from a preset button, please press
and hold the relating button for 10 seconds until the corresponding preset
[P1], [P2] or [P3] is shown in the display rapidly flashing.

AUTOMATIC UPDATES

After you have connected the Smart Soundbar 9 to the network, firmware
updates are executed automatically. After each connection to the power
supply and at regular intervals (also in standby mode), the Smart Soundbar 9
searches for an update and installs this, if available. The LED flashes green/red
during the update and the display first shows „DOWNLOADING", then
„UPDATING". During this time your Soundbar 9 is not operable.
To do this, the Smart Soundbar 9 must have been connected to the network
router via the Google Home app or an iOS device (by use of WLAN) or
alternatively by a network cable (by use of LAN).
Warning:
• Do not disconnect the Smart Soundbar 9 from the power supply during
an update process!
Note:
• The Smart Soundbar 9 contains a multitude of other great functions.
All settings can be found in the detailed instruction manual.
This can be found under: www.canton.de/manual/soundbar9
English
3 4 5