INVENTOR GR1VI410-18WF Installationshandbuch Seite 13

Wall
Indoor
Fig.3.2
Fig. 3.2
MOUNTING PLATE DIMENSIONS
Different models have different mounting plates.
In order to ensure that you have ample room to
mount the indoor unit, the diagrams to the right
show different types of mounting plates along
with the following dimensions:
Width of mounting plate
•
Height of mounting plate
•
Width of indoor unit relative to plate
•
Height of indoor unit relative to plate
•
Recommended position of wall hole (both
•
to the left and right of mounting plate)
Relative distances between screw holes
•
The installation plate is xed with a screw for
the convenience of shipment, please remove
the screw rst before installation.
Correct orientation of Mounting Plate
Outdoor
130mm(5.1in)
127mm(5in)
Left rear wall
hole 65mm (2.5in)
144mm(5.6in)
127mm(5in)
Left rear wall
hole 65mm (2.5in) 1004mm(39.5in)
182mm(7.1in)
156mm(6.1in)
Left rear wall
hole 65mm (2.5in)
NOTE: When the gas side connective pipe is
Φ
16mm(5/8in) or more, the wall hole should
be 90mm(3.54in).
450mm(17.7in)
89mm(3.5in)
216mm
47mm
897mm(35.3in)
(8.5in)
(1.8in)
Model A
518mm(20.4in)
83mm(3.2in)
210mm
47mm
(8.2in)
(1.8in)
Model B
601mm(23.6in)
56.5mm(2.2in)
212.2mm
51.3mm
1130mm(44.5in)
(8.3in)
(2.0in)
Model C
ƒPage 13
Indoor unit
outline
Right rear wall
hole 65mm (2.5in)
Indoor unit
outline
Right rear wall
hole 65mm (2.5in)
Indoor unit
outline
Right rear wall
hole 65mm (2.5in)
„