Carrier XCT7 Installations- Und Benutzerhandbuch Seite 45

Electric Wiring and Application
SW1 SW2 SW3 Function
15 (F) 0 2 In the same machine drive
off control selection
15 (F) 1 2 Selection of low temperature
automatic operation control
for indoor units
15 (F) 2 2 Pipe length selection
15 (F) 3 2 Defrosting conditions
selection
15 (F) 4 2 Operation mode priority
15 (F) 6 2 Heating limit when Outdoor
temperature is over 25 degrees
15 (F) 7 2 Silent running option
15 (F) 8 2 snow-proof operation setting
15 (F) 9 2 When the main outdoor
machine is running, the choice
of operation of the
wind turbine is stopped.
15 (F) 12(C) 2 Power limit operation control
mode selection
15 (F) 13(C) 2 Power output ratio selection (E2
control method is valid)
Digital tube LD1 - 4 display
0- machine automatic control according to the
group number, all within the machine with
1- drive
2- all in each machine control, drive off with ban
0- within the machine automatic control
1- all within the machine is valid
2- all the inside of the machine is invalid
0 short pipe length
1 middle pipe length
2 long pipe length
0- normal area
1- area easy to frost
0- first open priority
1-after opening priority
2-cooling priority
3- heating priority
0-shows no limitation
1-shows limitation
0-without silent operation,
1- silent operation 1
2- silent operation 2
3- silent operation 3
4- silent operation 4
0-without snow-proof operation,
1- with snow-proof operation
0-stop,
1-run
0- by E2 value,
1- by external contact ORM
Maximum capacity to allow the maximum number
of files, a total of 1 stall, 0 stalls for 10, 0%, 100%
38
Control range
Group class
(physical
master unit is
valid)