Carrier XCT7 Installations- Und Benutzerhandbuch Seite 18

Installation Instruction
Install Snow Cover
Outlet snow cover
In areas with snowfall, please install snow cover (see
picture on the right). It is important to set a high plat-
Inlet snow cover
form, which is calculated as per the maximum amount of
snowfall in the area. Also, the outdoor machine's defrost
setting should be changed to frost setting. For details,
see the digital tube setting.
Panel Disassembly Instruction
Please refer to the following figure for repairing and removing the board:
1. Remove screw A, B, and C by repeatedly turning counter clockwise with a wrench or screwdriver.
11