Carrier XCT7 Installations- Und Benutzerhandbuch Seite 37

Electric Wiring and Application
When the outdoor unit is combined, only the host machine is installed 40VCLM-7FQEE. The sub machine is
connected with the main machine through the communication terminal of the NB/C.
Indoor 1
40VCLM-7FQEE installation method
1. Remove the outdoor unit cover, install the 40VCLM-7FQEE in the slot inside the top cover, and use the (self) fixed
tape.
Place the 40VCLF-7FQEE antenna down at 90 ° angle.
Single fan
2. Follow the route instructions
3. Set the dial - refer to the setting method.
4. Installation notes - refer to the installation instructions of 40VCLM-7FQEE
Indoor 2 Indoor 3
Double fan
Connecting
line
Indoor 4
30
Indoor n