Setting the time
GB
IE
Setting the date
Setting the memory function
12
Prerequisite: The device is in the operational mode clock/standby operation.
♦
Press the Bass/AMS/Mode
begins to blink.
♦
Set with the buttons Tune+
each button press the time of day changes by one minute. Holding down
the respective button for more than 2 seconds starts the speed setting.
♦
Press the Bass/AMS/Mode
move to the next menu item.
NOTICE
►
The time of day will revert back to
from the mains power supply and no battery is inserted or if the battery is too
weak.
Prerequisite: The device is in the operational mode clock/standby operation.
♦
Press the Bass/AMS/Mode
blink.
♦
Set with the buttons Tune+
button press the date is changed by one day. The weekday indicator changes
automatically. Holding down the respective button for more than 2 seconds
starts the speed setting.
♦
Press the Bass/AMS/Mode
move to the next menu item.
NOTICE
►
The date will revert back to
mains power supply and no battery is inserted or if the battery is too weak.
You can set up to 10 date reminders to which an automatic reminder will be
triggered. The function SdA (SdA=Special Day Alert) is useful as a reminder, for
example, of birthdays or other recurring events. The reminder occurs every year
on the same date.
Prerequisite: The device is in the operational mode clock/standby operation.
♦
Press the Bass/AMS/Mode
selected reminder date is shown alternating with the indicator
the indicator
is the number of the memory slot for that date. Possible
reminders are
Handling and operation
button once. The time of day indicator
7
and Tune–
12
13
button again to save the current setting and
7
o'clock if the device is disconnected
button twice. The date indicator begins to
7
and Tune–
12
13
button again to save the current setting and
7
, if the device is disconnected from the
button three times. The current setting of the
7
to
.
the current time of day. With
the current date. With each
. Next to
SKRD 30 A1