Setting The Date / Time - Silvercrest SWED 500 A1 Bedienungsanleitung

SilverCrest SWED 500 A1
UTC represents the reference time for the various global time zones. The times
of the time zones are derived from this reference time. The differences are
presented in the second column.
To set the time zone, do the following:
 When the radio is switched off, press the 'MODE' button (10) five times. The
current time will be on the screen and the associated city abbreviation will
be displayed in the bottom right-hand corner. The default setting is 'UTC'.
 By pressing the 'UP' (13) or 'DOWN' (15) buttons, you can now set the city
abbreviation that is appropriate to your time zone, e.g., BER for Berlin. You
can find the appropriate city abbreviation in the table above.
After this, set the correct time, as described below.

Setting the date / time

First, set the correct time zone.
The time can only be altered when the radio is switched off. If it is on, press the
'POWER/SLEEP' button (6) to switch it off.
If no buttons are pressed for five seconds during set-up, the settings will be
accepted and the set-up mode will be ended.
 Press the 'TIME/MEM' button (8) once. By pressing the 'UP' (13) or 'DOWN'
(15) buttons, you can now set the year. You can also hold down the
buttons to move more quickly through the numbers. Confirm your settings by
pressing the 'TIME/MEM' button (8).
 At this stage you can set the day.month by pressing the 'UP' (13) or
'DOWN' (15) buttons. You can also hold down the buttons to move more
22 - English