Time/Date; Setting The Date And Time - Silvercrest SRH 5 B2 Bedienungsanleitung Und Sicherheitshinweise

Time/date

If an RDS signal (radio data system) is available, the date and time are automat-
ically set via the radio stations . If no RDS signal is available, you can also set the
date and time manually:

Setting the date and time

♦ While in the System menu, press the TUNE+
times if necessary) or turn the VOLUME |
until Time appears on the display
♦ Press the VOLUME |
♦ Press the TUNE+
VOLUME |
the display
♦ Press the VOLUME |
Set time appears on the display
♦ Press the TUNE+
ENTER / SCAN dial
♦ Press the VOLUME |
The minutes flash on the display
♦ Press the TUNE+
ENTER / SCAN dial
♦ Press the VOLUME |
date appears on the display
♦ Press the TUNE+
ENTER / SCAN dial
♦ Press the VOLUME |
The month flashes on the date display
♦ Press the TUNE+
ENTER / SCAN dial
♦ Press the VOLUME |
The year flashes on the date display
♦ Press the TUNE+
ENTER / SCAN dial
♦ Press the VOLUME |
The display
NOTE
► In standby mode, the time and date are shown on the display
■ 60 GB │ IE
│
ENTER / SCAN dial
or TUNE−
8 7
ENTER / SCAN dial
.
1
ENTER / SCAN dial
1
or TUNE−
8 7
to set the hours .
6
ENTER / SCAN dial
1
or TUNE−
8 7
to set the minutes .
6
ENTER / SCAN dial
and the day flashes on the date display .
1
or TUNE−
8 7
to set the day .
6
ENTER / SCAN dial
or TUNE−
8 7
to set the month .
6
ENTER / SCAN dial
or TUNE−
8 7
to set the year .
6
ENTER / SCAN dial
shows the message Time saved .
1
or TUNE−
8
ENTER / SCAN dial
.
1
to confirm the selection .
6
button several times or turn the
until Set date/time appears on
6
to confirm the selection .
6
and the hour display flashes .
button or turn the VOLUME |
to confirm the entry .
6
.
button or turn the VOLUME |
to confirm the entry . Set
6
button or turn the VOLUME |
to confirm the entry .
6
.
1
button or turn the VOLUME |
to confirm the entry .
6
.
1
button or turn the VOLUME |
to confirm the entry .
6
button (several
7
6
.
1
SRH 5 B2