Troubleshooting - Hendi 3500 Bedienungsanleitung

Cleaning and maintenance
• Always unplug from the socket before cleaning
the appliance.
• Beware: Never immerse the appliance in water
or any other liquid!
• Clean the outside of the appliance with a damp
cloth (water with mild detergent).
• Never use aggressive cleaning agents or abra-
sives. Do not use any sharp or pointed objects.

Troubleshooting

If the appliance does not function properly, please
check the below table for the solution. If you are
still unable to solve the problem, please contact the
supplier/service provider.
Problems
The appliance does not switch ON.
Cooling fan is operating even after
the appliance is switched to OFF
mode.
Technical specification
Item no. : 239766
Operating voltage & frequency: 220-240V~50/60Hz
Rated input power: 3500W
Power setting: 500 -3500W
Remark: Technical specification is subjected to change without prior notification.
Warranty
Any defect affecting the functionality of the ap-
pliance which becomes apparent within one year
after purchase will be repaired by free repair or re-
placement provided the appliance has been used
and maintained in accordance with the instructions
and has not been abused or misused in any way.
Your statutory rights are not affected. If the appli-
ance is claimed under warranty, state where and
• Clean the ventilation slots (if applicable) with the
• Clean the ceramic plate each time after use. This
• Error codes shown on the digital display. (See -->
Possible cause
- Power plug is not connected properly
with the electrical outlet.
- Without switch ON the appliance by turn
ON the knob.
- This is normal. The cooling fan contin-
ues running in Standby mode for some
time to cool down all internal elements.
Protection class: Class I
Waterproof protection class: IPX3
Dimension: 340 x 450 x (H)120mm
when it was purchased and include proof of pur-
chase (e.g. receipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
Do not use petrol or solvents! Clean with a damp
cloth and detergent if necessary. Do not use
abrasive materials.
vacuum cleaner.
is to prevent any residues from burning onto the
glass plate.
Error codes display)
Possible solution
- Check the power plug to make sure
it is connected properly.
- Switch ON the appliance by turning
ON the knob.
- Wait until the cooling fan stops ro-
tating.
EN
7