Troubleshooting; Warranty - Hendi 7000 Gebrauchsanweisung

Storage
• Before storage, always make sure the appliance
has already been disconnected from the electri-
cal outlet and cooled down completely.

Troubleshooting

If the appliance does not function properly, please
check the below table for the solution. If you are
still unable to solve the problem, please contact the
supplier/service provider.
Problems
The appliance does not switch on.
Cooling fan is operating even after
the appliance is switched to STAND-
BY mode.
Technical specification
Item no.: 239346
Operating voltage and frequency:
EN
380-400V~ 3N~ 50/60Hz
Rated input power: 7000W
Power setting: Front hob: Min. 800W, Max. 5000W
Rear hob: Min. 800W, Max. 3500W (Changed to 2000W when front hob is 5000W)
Remark: Technical specification is subjected to change without prior notification.

Warranty

Any defect affecting the functionality of the ap-
pliance which becomes apparent within one year
after purchase will be repaired by free repair or re-
placement provided the appliance has been used
and maintained in accordance with the instructions
and has not been abused or misused in any way.
Your statutory rights are not affected. If the appli-
ance is claimed under warranty, state where and
Discarding & Environment
At the end of the life of the appliance, please dis-
pose of the appliance according to the regulations
and guidelines applicable at the time.
8
• Store the appliance in a cool, clean and dry place.
• Never put objects on the heating surface as it
may crack the surface.
• Error codes shown on the digital display (2) or (3).
(See - - > Error codes display)
Possible cause
- Power plug is not connected proper-
ly with the electrical outlet.
- Without turn on the appliance
- This is normal. The cooling fan con-
tinues running in Standby mode for
some time to cool down all internal
elements.
Protection class: Class I
Waterproof protection class: IPX3
Dimension: 698 x 405 x (H) 145 mm
Net weight: approx. 17kg
when it was purchased and include proof of pur-
chase (e.g. receipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
Throw packing materials like plastic and boxes in
the appropriate containers.
Possible solution
- Check the power plug to make sure
it is connected properly.
- Switch ON the appliance by rotating
the knob (1) or (4) clockwise.
- Wait until the cooling fan stops op-
erating.