Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting - Hendi 7000 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für 7000:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 9

Troubleshooting

If the appliance does not function properly, please
check the below table for the solution. If you are
still unable to solve the problem, please contact the
supplier/service provider.
Problems
The appliance does not switch ON.
Cooling fan is operating even after
the appliance is switched to Standby
mode.
Technical specification
Item no.: 239346
Operating voltage and frequency:
380-400V~ 3N~ 50/60Hz
Rated input power: 7000W
Power setting: Front hob: Min. 800W, Max. 5000W
Rear hob: Min. 800W, Max. 3500W (Changed to 2000W when front hob is 5000W)
Remark: Technical specification is subjected to change without prior notification.
EN
Warranty
Any defect affecting the functionality of the ap-
pliance which becomes apparent within one year
after purchase will be repaired by free repair or re-
placement provided the appliance has been used
and maintained in accordance with the instructions
and has not been abused or misused in any way.
Your statutory rights are not affected. If the appli-
ance is claimed under warranty, state where and
Discarding & Environment
When decommissioning the appliance, the prod-
uct must not be disposed of with other household
waste. Instead, it is your responsibility to dispose to
your waste equipment by handing it over to a des-
ignated collection point. Failure to follow this rule
may be penalized in accordance with applicable
regulations on waste disposal. The separate col-
lection and recycling of your waste equipment at
the time of disposal will help conserve natural re-
8
• Error codes shown on the digital display (2) or (3).
(See --> Error codes display)
Possible cause
- Electrical power connection is not
connected properly with the electri-
cal outlet.
- On/Standby (1) button is not pressed.
- This is normal. The cooling fan con-
tinues running in Standby mode for
some time to cool down all internal
elements.
Protection class: Class I
Waterproof protection class: IPX3
Dimension: 698 x 405 x (H) 145 mm
Net weight: approx. 18kg
when it was purchased and include proof of pur-
chase (e.g. receipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
sources and ensure that it is recycled in a manner
that protects human health and the environment.
For more information about where you can drop off
your waste for recycling, please contact your local
waste collection company. The manufacturers and
importers do not take responsibility for recycling,
treatment and ecological disposal, either directly
or through a public system.
Possible solution
- Check the electrical power connec-
tion to make sure it is connected
properly.
- Press the On/Standby (1) button to
start operation.
- Wait until the cooling fan stops ro-
tating.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

239346

Inhaltsverzeichnis