Troubleshooting; Warranty - Hendi 2000 Bedienungsanleitung

Trouble shooting
Error message Cause
E01
Internal temperature of the appliance is too
high or the fan inside is not working.
E02
The temperature of the pan is too high. If the
pan is dry or empty it can reach a very high
temperature. The appliance will shut down to
protect the internal parts.
E03
Input voltage is too high or too low.
Technical specification
Item no.: 239230
Operating voltage and frequency: 220 - 240V~ 50/60 Hz
Dimension: 296x370x(H)46mm
Remark: Technical specification is subjected to change without prior notification

Warranty

Any defect affecting the functionality of the ap-
pliance which becomes apparent within one year
after purchase will be repaired by free repair or re-
placement provided the appliance has been used
and maintained in accordance with the instructions
and has not been abused or misused in any way.
Your statutory rights are not affected. If the appli-
ance is claimed under warranty, state where and
Discarding & Environment
When decommissioning the appliance, the prod-
uct must not be disposed of with other household
waste. Instead, it is your responsibility to dispose to
your waste equipment by handing it over to a des-
ignated collection point. Failure to follow this rule
may be penalized in accordance with applicable
regulations on waste disposal. The separate col-
lection and recycling of your waste equipment at
the time of disposal will help conserve natural re-
Solution
Make sure there is a minimum distance of
10cm between the ventilation slot and any ob-
struction such as a wall or other appliances.
Unplug, let the appliance cool down, plug back
in and switch ON the appliance.
Check and clean the air inlet and outlet if they
are blocked.
Remove the cookware from the appliance. Let
the appliance cool off.
Make sure the appliance is connected to the
correct input voltage.
Rated input power: 2000W
Protection class: Class II
when it was purchased and include proof of pur-
chase (e.g. receipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
sources and ensure that it is recycled in a manner
that protects human health and the environment.
For more information about where you can drop off
your waste for recycling, please contact your local
waste collection company. The manufacturers and
importers do not take responsibility for recycling,
treatment and ecological disposal, either directly
or through a public system.
EN
9