Renishaw Primo Schnellstartanleitung Seite 62

PROBE STATUS 1
Pulsed
ON
Note: If the error code E08 appears on the interface's 'REMAINING CREDIT (DAYS)' window
when the start switch setting is changed, the part setter must be reacquired.
1-54
Switch SW1 output configuration
Low battery/
N/O
Level
N/C
credit Error
N/O
N/O
Abbreviations are as follows:
• N/O = Normally open
• N/C = Normally closed
Factory settings are shown
N/C N/C