Proper Training - KULZER i700 Handbuch

damage to the unit.
▪...... ... B efore using the system, check that there are no issues such as
physical damage or loose parts. If there is any visible damage, do
not use the product and contact the manufacturer or your local
representative.
▪...... ... C heck the i700 body and its accessories for any sharp edges.
▪...... ... W hen not in use, the i700 should be kept mounted on a desk stand
or wall mount stand.
▪...... Do not install the desk stand on an inclined surface.
▪...... Do not place any object on the i700 body.
▪...... Do not place the i700 on any heated or wet surface.
▪...... ... D o not block the air vents located at the rear of the i700 system. If
the equipment overheats, the i700 system may malfunction or stop
working.
▪...... Do not spill any liquid on the i700 device.
▪...... Do not pull or bend the cable connected to the i700.
▪...... ... C arefully arrange all the cables so that you or your patient do not
trip or get caught in the cables. Any pulling tension on the cables
may cause damage to the i700 system.
▪...... ... A lways place the power cord of the i700 system in an easily
accessible location.
▪...... ... A lways keep an eye on the product and your patient while using
the product to check for abnormalities.
▪...... ... I f you drop the i700 tip on the floor, do not attempt to reuse
it. Discard the tip immediately as there is a risk that the mirror
attached to the tip may have been dislodged.
▪...... ... D ue to its fragile nature, the i700 tips should be handled with care.
To prevent damage to the tip and its internal mirror, be careful to
avoid contact with a patient's teeth or restorations.
▪...... ... I f the i700 is dropped on the floor or if the unit is impacted, it must
be calibrated before use. If the instrument is unable to connect to the
software, consult the manufacturer or authorized resellers.
▪...... ... I f the equipment fails to operate normally, such as having
issues with accuracy, stop using the product, and contact the
manufacturer or authorized resellers.
▪...... ... I nstall and use only approved programs to ensure proper
functionality of the i700 system.
▪...... ... A ny serious incident that has occurred related to the device should
be reported to the manufacturer and the competent authority of
the member state in which the user and patient are established.

5.2 Proper Training

WARNING
Before using your i700 system on patients:
▪...... ... Y ou should have been trained to use the system, or you should
have read and fully understood this user guide.
▪...... ... Y ou should be familiar with the safe use of the i700 system as
detailed in this user guide.
▪...... ... B efore use or after changing any settings, the user should check
that the live image is displayed properly in the camera preview
window of the program.
Intraoral Scanner i700 15