Charging The Internal Battery - Silvercrest SKHK 40 C1 Bedienungsanleitung

Charging the internal battery

NOTE
► Before using the headphones, the integrated battery must be completely
charged.
ATTENTION
► Charge the headphones only in dry indoor spaces.
► Use only the supplied USB charging cable
► Always disconnect the USB charging cable
♦ Make sure that the headphones are switched off. To switch off the
headphones, press the
sounds and the operating/charging LED
♦ Connect the USB plug on the USB charging cable
adapter or a USB port on your computer.
♦ Connect the micro USB plug of the USB charging cable
USB charging socket
NOTE
► The operating/charging LED
the battery is fully charged, the operating/charging LED goes out.
► Charging takes about 3.5 hours at a charging current of 500 mA. When
the battery is fully charged, you can play back music at a medium volume
(85 dB(A)) for up to 36 hours. The playback time may vary depending on
level of the volume.
► When the battery is empty, you will hear two beeps at an interval of 10 min-
utes, and the operating/charging LED
15 seconds. The headphones then switch off automatically.
SKHK 40 C1
5
button
9
on the headphones.
0
lights up orange during charging. When
0
w
to charge the headphones.
w
when charging is complete.
for about 2 seconds until a beep
0
goes out.
w
to a USB mains
flashes three times orange every
GB │ IE
w
to the micro
│
9 ■