Querying The Battery Charge Level; Charging The Headphones Battery - Silvercrest SBKL 5.0 A1 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest SBKL 5.0 A1

8.1.1 Querying the battery charge level

If you have not charged the battery in the charging and storage box as
described above and you want to know how much charge is in the
battery, the procedure is as follows:
1. Press the button for the battery charge level display (8) to query the
charge level for the battery (see table below).
LED 1 LED 2
Blue Blue
Blue Blue
Blue Blue
Blue –

8.2 Charging the headphones battery

Before using for the first time or if the built-in battery on the headphones is
empty (a flashing LED (5) and a beep indicate that the battery is low),
charge it up as follows:
1. Carefully remove the cover from the charging port (1) and twist it to
one side.
2. Connect the USB charging cable (B) to the charging port (1) and to the
charging connection (9) in the charging and storage box.
WARNING! Do not cover the headphones during the charging
process, as this could cause them to overheat.
You can also connect the headphones to a free USB port on
your computer (which must be powered on) or a USB power
adapter (not supplied) to charge them up.
40 - English
LED 3 LED 4
Blue Blue
Blue –
– –
– –
Meaning
Battery charged
Battery 75 % charged
Battery 50 % charged
Battery 25 % charged