Overview Of The Controls And Button Functions; Prior To Use; Charging The Battery - Silvercrest SBTH 4.1 A1 Bedienungs- Und Sicherheitshinweise

SilverCrest SBTH 4.1 A1

Overview of the controls and button functions

An illustration of the controls with the relevant reference numbers can be found
on the fold-out inside cover of these instructions. You can leave this cover page
folded out while reading further sections of these instructions. Thus you always
keep a reference to the relevant control in sight.
1 Headband
2 ▸ll button
3
- button
4
+ button
5 button
6 Loudspeaker
7 USB charging port
8 LED
9 3.5mm jack socket
10 Microphone

Prior to use

Charging the battery

Before using the device for the first time or when the built-in battery is empty,
you charge it as follows:
 Connect the supplied USB charging cable (B) to the USB charging port (7)
and a free USB port of your computer when it is switched on or a USB
power supply (not supplied).
 The LED (8) lights up orange while charging. When the battery is fully
charged, the LED (8) lights up blue.
When the battery charge is low, the LED (8) flashes orange once every 20
seconds, and 4 beeps sound at the same time.
Please note that the battery only reaches full capacity after 4-5
full charge/discharge cycles.
30 - English