WIKA CPH6200-S1 Betriebsanleitung Seite 18

Hand-Held Pressure Indicator
CPH6200-S1 / CPH6200-S2
GB
18
Max. number of measurements:
The data recorded includes the following values:
Sensor 1 instantaneous value at that data point

Sensor 1 Min-Peak, Max-Peak since last data point

Sensor 2* instantaneous value at that data point

Sensor 2* Min-Peak, Max-Peak since last data point

Instantaneous difference (Sensor 1 - Sensor 2)* at that data point

Min-Peak, Max-Peak of the difference (Sensor 1 - Sensor 2)*,

Min-Peak, Max-Peak since last data point
Time and date stamp of that data point

* Only for 2-channel version CPH6200-S2
After each recording "St. XX" will be displayed for a short time. XX
represents the number of the data point.
If the logger memory already contains data:
When the ´Store/Quit´ key is pressed for 2 seconds, the option to
clear the logger memory will be displayed:
clear
all data points
clear the last
data point
Use the ´Min´ or the ´Max´ key to display the required option. The
´Store/Quit´ key selects that choice.
If the logger memory is full, the display will show:
Viewing Recorded Measurements
Within the "LoGG-Stor" function the measurements can be viewed di-
rectly on the instrument display as well as through a computer ("Func-
CYCL" only allows for the data to be viewed on computer). Press the
´Set/Menu´ key for 2 seconds: The first menu displayed is now "rEAd-
LoGG" (read logger data). By then pressing the ´Tare´ key, the last
measurement recorded will be displayed; pressing the ´Tare´ key again
scrolls between the different values related to this data point.
Pressing the ´Min´ key or ´Max´ key selects different data points.
WIKA Operating Instructions Hand-Held Pressure Indicator
99
clear nothing
(cancel menu)