Deactivating The Timer; Activating The Timer/Displaying A Set Start Time; Deactivating The Acoustic Signals - Miele SPQL0 Gebrauchsanweisung

 Press the + or - direction button to
set the minutes you want.
 Press the OK button to confirm your
selection.
 Press the Mode button repeatedly
until the symbol for the operating
mode you want flashes in the control
field.
 Press the OK button to confirm your
selection.
The settings are shown for approx.
3 seconds in the control field. The robot
vacuum cleaner will now start to va-
cuum at the same time each day.
If the timer  indicator is lit up in the
control field, the timer is activated.
To alter the entries, proceed as de-
scribed above. Then press the
Timer button for 3 seconds.
Tip: you can save up to 7 individual
"start time – operating mode" combin-
ations if you set the timer using a mo-
bile device, see section "Scout RX
app".
Please note that the robot vacuum
cleaner always follows the save com-
mands which were set most recently,
regardless of whether the settings
were configured using the remote con-
trol, control unit or with a mobile
device.

Deactivating the timer

 Press the Timer button on the remote
control briefly.
The Timer  indicator goes out in the
control field.
Activating the timer/displaying a set
start time
 Press the Timer button on the remote
control briefly.
The timer  indicator lights up in the
control field and the set start time is
shown briefly in the display. The robot
vacuum cleaner will start to vacuum at
the set time.

Deactivating the acoustic signals

Acoustic signals are set as standard.
You can deactivate and then reactivate
them.
en
63