Herunterladen Inhalt Inhalt Diese Seite drucken

Functions And Features Of The Robot Vacuum Cleaner; Accessories Supplied; Connection - Miele SPQL0 Gebrauchsanweisung

Robot vacuum cleaner
Inhaltsverzeichnis

Werbung

en
Functions and features of the
robot vacuum cleaner
The robot vacuum cleaner is suitable for
the daily cleaning of hard floors, fitted
carpets and short-pile rugs and can
also be used on deep-pile rugs.
Please observe the flooring manufac-
turer's cleaning and care instructions.
The robot vacuum cleaner is fitted with
cameras and sensors. It can vacuum all
accessible areas efficiently and inde-
pendently.

Accessories supplied

- Remote control/2 batteries
- 2 universal side brushes with 20 arms
(for hard floors, fitted carpets and
short-pile rugs)
- 2 carpet side brushes with 6 arms
(for deep-pile rugs)
- Power supply unit with plug
- Country-specific power adapter
- Base station and adhesive holder
- Magnetic strip

Connection

Illustrations 1–12 for this section are
on the last fold-out page at the end of
these operating instructions.
Inserting the side brushes
(Fig. 01 + 02)
 Place the robot vacuum cleaner up-
side down on a level, clean surface.
56
If the area to be vacuumed features
hard floors, fitted carpets and short-
pile rugs, use the two 20-arm univer-
sal side brushes. For deep-pile rugs,
the two 6-arm carpet side brushes are
more suitable.
 Select the appropriate pair of side
brushes.
 Press the two side brushes carefully
onto their pins until they audibly en-
gage. Take care to comply with the
markings L and R.
Removing the protective foil (Fig. 03)
 Remove the protective foil from the
base station and from the robot va-
cuum cleaner display.
 Remove the protective strip from the
depression of the storage compart-
ment.
Placing the batteries in the remote
control (Fig. 04)
Observe the instructions regarding the
handling of batteries found in the
"Safety notes and warnings" section
at the beginning of these operating in-
structions.
 Remove the battery compartment
cover.
 Insert the 2 batteries supplied. Make
sure the polarity is correct.
 Close the battery compartment cover.
Switching on the robot vacuum
cleaner (Fig. 05)
 Press the I/0 switch on the side of the
robot vacuum cleaner to the I posi-
tion.

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis