Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Care; Storage/Factory Default Settings - Miele SPQL0 Gebrauchsanweisung

Robot vacuum cleaner
Inhaltsverzeichnis

Werbung

Cleaning and care

Risk of injury caused by rotating
roller brush.
The robot vacuum cleaner may start
without warning while maintenance
work is being carried out.
Switch the robot vacuum cleaner off
before doing any maintenance work.
To switch it off, press the I/0 switch
on the side of the robot vacuum
cleaner to the 0 position.
Robot vacuum cleaner and accessor-
ies
Risk of electric shock from mains
voltage.
If moisture gets into the robot va-
cuum cleaner and accessories, there
is a risk of electric shock.
Do not immerse the robot vacuum
cleaner or any accessories supplied
with it in water.
Observe the special cleaning instruc-
tions in the "Maintenance" section.
Clean the robot vacuum cleaner and all
plastic accessories with a commercially
available cleaner suitable for plastic.
Static charge can cause a build-up of
dust on the robot vacuum cleaner. This
should be removed using a soft, dry
cloth.
Damage due to unsuitable clean-
ing agents.
All surfaces are susceptible to
scratching. Contact with unsuitable
cleaning agents can alter or discol-
our the external surfaces.
Do not use abrasive cleaning agents,
glass cleaning agents, all-purpose
cleaners or oil-based conditioning
agents.
Storage/Factory default set-
tings
Storage
Switch the robot vacuum cleaner off
if it is not going to be used for an ex-
tended period of time. To switch it
off, press the I/0 switch on the side
of the robot vacuum cleaner to the 0
position.
If the robot vacuum cleaner is not going
to be used for an extended period of
time, make sure it is stored in a well
ventilated, cool place, but not at an am-
bient temperature below 0 °C.
For optimum care, store the robot va-
cuum cleaner at half charge capacity
(rechargeable battery status indicator
in the control field is orange).
en
73

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis