Cleaning The Roller Brush - Miele SPQL0 Gebrauchsanweisung

 Press the two cleaned side brushes
carefully onto their pins until they
audibly engage. Take care to comply
with the markings L and R.
In order to continue to achieve the
best possible cleaning results, re-
place the pair of side brushes after
approx. 1 year.

Cleaning the roller brush

Clean the roller brush as required. For
this, you will require the cleaning tool
which is located at the top of the dust
box lid.
 Place the robot vacuum cleaner up-
side down on a level, clean surface.
 Remove both side brushes, see
"Cleaning the side brushes".
 Release the roller brush cover and re-
move the cover.
 Remove the roller brush.
 Pull the bearing cover off the roller
brush and remove any threads or
hairs that have wound themselves
around the bearing.
 Refit the bearing cover, making sure it
clicks into position.
 Cut any threads or hairs that have
wound themselves around the roller
brush with a pair of scissors.
 Remove the threads and hair using
the wiper which is located on the bot-
tom of the cleaning tool.
 Hold the wiper over a bin.
 Press the button at the top of the
wiper several times until all threads
and hair have fallen out.
en
69