Deactivating The Timer; Activating The Timer / Displaying A Set Start Time - Miele SCOUT RX2 Gebrauchsanweisung

en
 Press the OK button to confirm your
selection.
The timer  indicator flashes in the dis-
play and the minute display flashes in
the indicator field.
 Press the + or - direction button to
set the minutes you want.
 Press the OK button to confirm your
selection.
 Press the Mode button repeatedly
until the symbol for the operating
mode you want starts flashing in the
display.
 Press the OK button to confirm your
selection.
54
The settings are shown for approx.
three seconds on the display. The robot
vacuum cleaner will now start to va-
cuum at the same time each day.
If the timer  indicator is lit up in the
display, then the timer is activated.
To alter the entries, proceed as de-
scribed above. Then press the Timer
button for three seconds.
Tip: You can save up to seven indi-
vidual combinations for the "start time
– operating mode" if you set the timer
using a mobile device, see section
"App Scout RX2".
Please note that the robot vacuum
cleaner always follows the save com-
mands which were set most recently,
regardless of whether the settings
were configured using the remote con-
trol or with a mobile device.

Deactivating the timer

 Press the Timer button on the remote
control briefly.
The timer  indicator goes out on the
display.
Activating the timer / displaying a set
start time
 Press the Timer button on the remote
control briefly.