Cleaning The Dust Box Seals; Replacing The Seal Unit On The Dust Box; Cleaning The Front Wheel - Miele SPQL0 Gebrauchsanweisung

en
 Refit the roller brush with the bearing
cover attached. Make sure that the
side with the pointed end is inserted
into the corresponding slot.
 Carefully refit the roller brush cover
on both sides, making sure it clicks
into position.
 Refit the side brushes, see "Cleaning
the side brushes".
In order to continue to achieve the
best possible cleaning results, re-
place the roller brush with a new one
after approx. 1 year.

Cleaning the dust box seals

Clean the seals on the bottom of the
dust box as required.
 Place the robot vacuum cleaner up-
side down on a level, clean surface.
 Wipe the seals with a slightly damp
cloth to clean them.
70
In order to continue to achieve the
best possible cleaning results, re-
place the seal unit with a new one
after approx. 1 year.
Replacing the seal unit on the dust
box
 Remove the dust box.
 Unlatch the seal unit from the under-
side of the dust box so that the arrow
points to the  symbol.
 Remove the seal unit.
 Insert the new seal unit so that the ar-
row points to the  symbol.
 Lock the seal unit, making sure it
clicks into position.
The arrow points to the  symbol.

Cleaning the front wheel

Clean the front wheel as required. For
this you will require the cleaning tool
which is located at the top of the dust
box lid.
 Place the robot vacuum cleaner up-
side down on a level, clean surface.
 Unclip the cover.
 Remove the front wheel.