Extras - MBZ EP-1 Original - Betriebs- Und Montageanleitung

11.2.2.Extras:

Adjustment of the adjusting ranges:
The adjusting ranges can be changed by means of the diagnostic software BEKA-DiSys.
All adjusting ranges for the lubrication time can be combined with all cycle time ranges.
Adjusting ranges:
Lubrication times:
1 to 16 min. (16 notches à 1 min.)
2 to 32 min. (16 notches à 2 min.)
2 to 32 sec. (16 notches à 2 sec.)
Exchange of the stickers:
After a change of the mode of operation or the adjusting range, the sticker in the inspection
window of the control unit has to be exchanged.
Labels can be ordered in German language with various lubrication and cycle time
combinations:
Lubrication time
I 1 min. to 16 min. 0490030325
II 2 min. to 32 min. 0490030328
III 2 sec. to 32 sec. 0490030331
Other languages are available on request!
Cycle time
0.5 h to 8 h 2 min. to 32 min.
0490030326
0490030329
0490030332
Connection of the
system diagnosis
Cycle times:
0,5 to 8 h (16 notches à 0,5 h)
2 to 32 min. (16 notches à 2 min.)
2 to 32 h (16 notches à 2 h)
Sticker in the inspection window
of the control unit
2 h to 32 h
0490030327
0490030330
0490030333
BEKA 2016 All rights reserved!
EN
29