Legend; Warranty And Extent Of Warranty; Safety Information - MBZ EP-1 Original - Betriebs- Und Montageanleitung

1.

Legend:

Safety instructions which, if not complied with, may endanger persons, are
marked specifically with the general hazard symbol:
This heading is used if inaccurate compliance or non-compliance with the
Operating Instructions or specified work procedures etc. may result in
damage:
Points out special information:
2.

Warranty and extent of warranty:

Note!
Inappropriate intervention will rule out your warranty claim!
Warranty regarding operational safety, reliability and performance of the lubricating pump is
only accepted by the manufacturer under the following conditions:
•
Assembly, connection, setting, maintenance and repair are carried out by authorized and
specialized staff.
•
The limits stipulated in the technical data must never be exceeded.
•
Only original components or components approved by the manufacturer may be used for
repair and maintenance work.
All guarantees and warranties expire for damages to central lubrication
systems that are caused by operation with improper lubricants (e.g. piston
wear, piston jamming, pluggings, embrittled sealings).
BEKA does not assume liability on damages caused by lubricants, even
Attention!
if these lubricants have been tested
and released by laboratory tests, as damages caused by lubricants
(e.g. by expired or improper stored lubricants, batch variations etc.) can
not be retraced to their root cause in retrospect.
3.

Safety information:

General information
Any safety-related faults must be eliminated without delay.
Below, please find fundamental instructions to be complied with, regarding assembly,
operation and maintenance. The mechanical and the competent specialists / staff of the
operating company must read the Operating Instructions on all accounts prior to starting
assembly and commissioning. Moreover, the Operating Instructions must permanently be
available on site.
Not only the safety instructions included under this item, but also the specific safety
instructions appearing in other parts of this manual must be complied with.
General risk reference
All system components have been designed in view of operational safety and accident
prevention according to the applicable provisions for the design of technical equipment.
Nevertheless, utilization thereof may result in risks for the user or third parties and/or technical
equipment. Thus, the system may only be used in proper technical working within its intended
fields of application and in compliance with the safety provisions and the Operating
Instructions.
Attention!
Note!
BEKA 2016 All rights reserved!
EN
5