Declaration Of Incorporation - MBZ EP-1 Original - Betriebs- Und Montageanleitung

Declaration of incorporation for incomplete machinery
The manufacturer: BAIER + KÖPPEL GMBH+CO. KG
EN
declares hereby, that the following partly completed machinery:
Product description: FETTSCHMIERPUMPE
Type designation:
Article number:
Serial number:
is complying with all essential requirements of the above mentioned machinery
directives (2006/42/EG):
Annex I, article 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.4, and 1.5.1.
The following coordinated standards have been used:
DIN EN 809
DIN EN ISO 12000
4
The following other specifications and standards have been used:
VDE 0530
The protection targets of the directive for electric equipment 2006/95/EG have been
observed according to the annex I, no. 1.5.1 of the machine directive.
The incomplete machine may only be put into service as soon as there has been stated
that the machine, into which the incomplete machine shall be installed, responds to the
determinations of the machine directive (2006/42/EG).
The special documentation that responds to the machine, has been prepared according to
annex VII part B.
The manufacturer (documentation department, phone +49 9241 729-779, email:
tb3@beka-lube.de) obliges itself to pass on electronically the special documentation for
partly completed machinery to individual national authorities upon request.
Pegnitz, 27.03.2013
ppa. A. Zapf (sales manager)
BEKA 2016 All rights reserved!
...a product of BEKA
(acc. to EC-directive 2006/42/EG)
Beethovenstrasse 14
91257 Pegnitz / Germany
Tel.: +49 9241 729-0
EP-1, FKGGM_EP
2018...; 2037...; 2152...; 2157...; 2175...; 2183...; 2184...
from 930000 to 999999