Pump Elements - MBZ EP-1 Original - Betriebs- Und Montageanleitung

10. Pump elements:

There are different pump elements available for the installation
into a central lubrication pump EP-1 or FKGGM-EP. You cannot
adjust the output rate at the pump elements PE-60, PE-120 and
PE-170 but at the pump element PE-120 V this is possible.
EN
10.1. PE-60, PE-120 and PE-170:
Technical data:
(cm
PE-60
PE-120
PE-170
Delivery medium:
Piston return:
20
10.2. PE-120 V:
Technical data:
Output rate: .............................................................................................. 0,04 to 0,12 cm
Output rate regulation: .......................................................... 6 notches with 1/2 a revolution each
Reduction: ..................................................................................................... 0,013 cm
Delivery medium: . . . . . . . . . . . . . . . . . . . . . . . . . . . . grease from NLGI-Kl. 00/000 to NLGI-cl. 2
Piston return: ................................................................................................ positively controlled
Order-no. (incl. pressure relief valve): .............................................................. 2152.99063.0000
Order-no. pressure relief valve for PE-120 V: .................................................................... 2152 0063
Output rate (cm³)
0.12
0.11
0.10
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0
0 1
0
0.5
BEKA 2016 All rights reserved!
...a product of BEKA
Output rate
3
/ stroke or rev.)
(incl. pressure relief valve)
0.06
0.12
0.17
2 3 4 5
1 1.5
2.0 2.5
Order-no.
2152 99067 0000
2152 99061 0000
2152 99069 0000
Grease from NLGI-Kl. 00/000 to NLGI-Kl. 2
Pressure relief valve
set at 280 bar
permanently
6 Notches
3.0 Revolutions
P E-60, PE-120, PE-170:
Pressure relief valve
set at 280 bar
permanently
A/F 24
Pipe connection Ø 6
Order-no.
Pressure relief valve
2152 0062
positively controlled
A/F 24
3
32
Pipe connection Ø 6
66
3
/stroke
3
per notch
2