Troubleshooting - JVC KD-SX1500R Bedienungsanleitung

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a
service centre.
Symptoms
• CD cannot be played back.
• CD sound is sometimes
interrupted.
• Sound cannot be heard from
the speakers.
• SSM (Strong-station Sequential
Memory) automatic preset does
not work.
• Static noise while listening to
the radio.
• "No Disc" appears on the
display.
• "Reset 8" appears on the
display.
• "Reset 1-Reset 7" appears on
the display.
• CD can be neither played back
nor ejected.
• This unit does not work at all.
• The CD changer does not work
at all.
48
Causes
CD is inserted upside down.
You are driving on rough roads.
CD is scratched.
Connections are incorrect.
The volume level is set to the
minimum level.
Connections are incorrect.
Signals are too weak.
The antenna is not connected
firmly.
No CD is in the loading slot (or in
the magazine).
CD is inserted incorrectly.
This unit is not connected to a CD
changer correctly.
This unit is not connected to a
DAB tuner unit correctly.
The CD player may function
incorrectly.
The built-in microcomputer may
function incorrectly due to noise,
etc.
Remedies
Insert the CD correctly.
Stop CD play while driving on
rough roads.
Change the CD.
Check the cords and connections.
Adjust it to the optimum level.
Check the cords and connections.
Store stations manually.
Connect the antenna firmly.
Insert CD.
Insert it correctly.
Connect this unit and the CD
changer correctly and press the
reset button of the CD changer.
Connect this unit and the DAB
tuner unit correctly.
Press the reset button of the CD
changer.
Press CD and SEL at the same
time for more than 2 seconds.
("Please Eject" appears on the
display.) When you open the
control panel by pressing 0, be
careful not to drop CD when it is
ejected.
Press and SEL at the
same time for more than 2 seconds
to reset the unit. (The clock setting
and preset stations stored in
memory are erased.)