Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting - JVC EXAD KD-AVX22E Bedienungsanleitung

Dvd-/cd-receiver
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.
Symptoms
• No sound comes out of the center speaker.
• The monitor is not clear and legible.
• The unit does not work at all.
• The remote controller does not work.
• "No Signal" appears.
• "Mecha Error Push Reset" appears on the
monitor, and the control panel does not
move.
• The touch pad controls do not respond
properly.
• <Illumination> function does not work
properly.
• SSM automatic presetting does not work.
• Static noise while listening to the radio.
Remedies/Causes
• Center speaker is not activated. (☞ page 51)
Once you have reset the unit, make sure to activate the
speaker again.
• Center speaker is used only for surround playback. No
sound comes out for stereo playback.
Sunshine from the windscreen may cause this symptom.
Adjust <Bright>. (☞ page 49)
Reset the unit. (☞ page 3)
Deactivate Dual Zone. (☞ page 30)
(While Dual Zone is activated, the remote controller only
functions for operating the DVD/CD player.)
• Change the source.
• Start the playback on the external component connected
to VIDEO IN plug.
• Check the cords and connections.
• Signal input is too weak.
Reset the unit. (☞ page 3)
• Keep your hands and controls clean and dry.
• Eliminate static electricity and do not place magnetic
items near the unit.
• Leave the unit until the temperature becomes stable in
the car.
• A rubber mat on the floor may cause this symptom. In
this case, do not use the rubber mat.
Store stations manually. (☞ page 14)
Connect the aerial firmly.
62

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Exad kd-avx22

Inhaltsverzeichnis