Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting - JVC KW-AVX820 Bedienungsanleitung

Dvd-receiver mit monitor
Vorschau ausblenden Andere Handbücher für KW-AVX820:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.
• For operations with the external components, refer also to the instructions supplied with the adapters used for the
connections (as well as the instructions supplied with the external components).
• Messages (enclosed in " ") in the tables below are shown in the language selected on <Language>. (
Messages described here are in the language of this manual.
Symptom
• No sound comes out of the speakers. • Adjust the volume to the optimum level.
• The screen is not clear and legible.
• "Position Error Push Open Key"
appears on the screen.
• "Mecha Error Push Reset" appears on
the screen, and the panel does not
move.
• "No Signal" appears.
• The buttons on the monitor panel do
not work.
• The unit does not work at all.
• The remote controller does not work. Deactivate Dual Zone. (
• The touch panel does not respond
properly.
• <Illumination> function does not
work properly.
Remedy/Cause
• Check the cords and connections.
• DTS sound cannot be reproduced through any terminals
(Speaker out/LINE OUT/DIGITAL OUT).
Sunshine from the windshield may cause this symptom.
Adjust <Bright>. (
14)
The monitor panel angle has been forcibly adjusted, or its
adjustment has been interrupted while opening or closing.
Press
, then [Open].
Reset the unit. (
3)
• Change the source.
• Start the playback on the external component connected to
VIDEO IN plug.
• Check the cords and connections.
• Signal input is too weak.
When the monitor panel is open, only VOL +/– and
work. The other buttons do not function.
Reset the unit. (
3)
(While Dual Zone is activated, the remote controller only
functions for operating the DVD/CD player.)
• Keep your hands and the touch panel clean and dry.
• Eliminate static electricity and do not place magnetic items
near the unit.
• Leave the unit until the temperature becomes stable in the car.
• A rubber mat on the floor may cause this symptom. In this
case, do not use the rubber mat.
40)
Continued on the next page
REFERENCES
15)
63

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Kw-avx820e

Inhaltsverzeichnis