Controlling The Volume Automatically (Audio Cruise) - JVC KD-SX1500R Bedienungsanleitung

Controlling the volume automatically (Audio Cruise)

You can select the proper cruise mode for your car.
This unit change the volume level automatically (at 3 possible levels) based on the driving
speed of your car by detecting the alternator's generating frequency (Audio Cruise).
If you want to use this mode, follow the procedures below. When shipped from the factory,
this mode is set to "Cruise Off."
• Cruise 1: Select this if your car is relatively quiet.
• Cruise 2: Select this if your car is relatively loud.
The volume increase rate is twice as much as that of the Cruise 1 setting.
• Cruise Off: Cancels Audio Cruise.
3
1
SEL
2
3
SEL
4
SEL
24
1, 4 2
Press and hold SEL (Select) for more than 2
seconds so that "PSM" appears on the
display.
Select "Cruise Mode," if not shown on the
display.
The current setting for this function also appears.
Select the Audio Cruise setting you want.
Cruise 1
Finish the setting.
Cruise 2 Cruise Off