Tuning Into A Preset Station - JVC KD-SX1500R Bedienungsanleitung

Tuning into a preset station

You can easily tune into a preset station.
Remember that you must store stations first. If you have not stored them yet, see pages 7
and 8.
1
Select the band (FM1, FM2, FM3 or AM) you want.
FM/AM
2
To change the display information while receiving a station
Press DISP. Each time you press the button, the following information is shown on the lower
part of the display.
When receiving an FM RDS station: Its PS (station name), band, and preset channel number
(if any) are always shown in the main display.
When receiving an AM station: Its station frequency, band, and preset channel number (if
any) are always shown in the main display.
* Level meter will not appear when "Level Meter" is deactivated (see page 28).
When an FM stereo broadcast is hard to receive:
Press MO/RND (Mono/Random) while listening to an FM stereo
MO
RND
broadcast. The MO indicator lights up on the display, and the sound you
hear becomes monaural but reception will be improved.
To restore the stereo effect, press the same button again.
2
FM1
Select the number (1 – 6) for the preset station
you want.
PTY (program type)
Level mater
Level mater
1
MO/RND
FM2 FM3
AM
Station frequency
*
Clock time
*
Clock time
DISP
9