JVC KD-SX1500R Bedienungsanleitung Seite 44

To activate your favorite Announcement types for
Announcement Standby Reception
When shipped from the factory, all Announcement Standby Receptions are deactivated.
1 Press and hold SEL (select) for more than 2 seconds so that "PSM" appears on the display.
¢ or 4
2 Press
3 Rotate the control dial until the Announcement type you want to use appears.
The current setting (Y: Yes – activated, N: No – deactivated) for the selected Announcement
type also appears.
• You can use the following Announcement types as the sources for Announcement
Standby Reception — Transport, Warning/Serv (service), News Flash, Weather Flash,
Event, Special Event, Radio Info (information), Sports News, and Financial News.
4 Press 5 or ∞ to activate or deactivate the Announcement Standby Reception of the selected
type.
• Select "Y" to activate the type selected in above step.
• Select "N" to deactivate the type selected in above step.
5 Repeat step 3 and 4 to set the other types of Announcement Standby Reception.
6 Press SEL (select) again to finish the setting.
Notes:
• When a DAB service broadcasts an Alarm signal (one type of Announcement signals to be used for
emergency cases), the unit automatically tunes into that service. The interruption triggered by Alarm
signal cannot be deactivated because of its importance. Furthermore, it also forces the unit to break
any other source.
• The Road Traffic Flash, another high priority type of Announcement signal is incorporated with the
TP function as described on page 42.
44
to select "Announce," if not shown on the display.