Herunterladen Inhalt Inhalt Diese Seite drucken

Using Standby Reception - JVC KD-SX1500R Bedienungsanleitung

Cd-receiver
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Using Standby Reception

Standby Reception allows the unit to switch temporarily to a Road Traffic Flash (traffic
announcement), another important announcement broadcast, and a service of your favorite
type from the current source.
Road Traffic Flash Standby Reception
TP
ANNOUNCE
How Road Traffic Flash Standby Reception works:
If a Road Traffic Flash (or Traffic Announcement) starts broadcasting while the Road Traffic
Flash Standby Reception is activated, "Traffic flash" (or "Traffic") appears and the unit tunes
into the service (or FM RDS station) broadcasting Road Traffic Flash (or Traffic Announcement).
The volume increases to the preset TA volume level and the Road Traffic Flash (or Traffic
Announcement) can be heard.
To deactivate Road Traffic Flash Standby Reception, press TP/ANNOUNCE briefly again.
Each time you press the button, Road Traffic Flash Standby Reception turns on and off.
42
Press TP/ANNOUNCE briefly to activate Road Traffic Flash Standby
Reception.
The TP indicator lights up (as follows).
• If you press the button while listening to a service supporting Road
Traffic Flash signal, the TP indicator lights up with its frame . This receiver
now stands by for the Road Traffic Flash signal reception.
• If you press the button while listening to a service NOT supporting
Road Traffic Flash signal, the TP indicator lights up without its frame .
In this case, Road Traffic Flash Standby Reception does not work.
– If an FM RDS station supporting TA signal is tuned in the background.
This receiver stands by for the TA signal reception and the TP indicator
lights up with its frame .
• If you press the button while listening to any other source than AM
– The TP indicator comes to light up with its frame when a service supporting
Road Traffic Flash signal (or an FM RDS station supporting TA signal) is
tuned in the background. This receiver now stands by for the Road Traffic
Flash signal (or TA signal) reception.
– The TP indicator keeps lit without its frame when a service supporting
Road Traffic Flash signal (or an FM RDS station supporting TA signal) is
NOT tuned in the background. In this case, this receiver cannot stand by
for Road Traffic Flash signal (or TA signal) reception.

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis