Selecting The Dimmer Mode; Controlling The Volume Automatically (Audio Cruise Mode) - JVC KD-MX2900R Installationsanleitung

Selecting the dimmer mode

When you turn on the car head lights, the display automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer mode is activated.
• DIMMER AUTO: Activates Auto Dimmer
• DIMMER OFF: Cancels Auto Dimmer
• DIMMER ON: Always dims the display
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select "DIMMER MODE" with
3. Select the desired mode with the control dial.
The dimmer mode changes as follows:
Note on Auto Dimmer:
Auto dimmer provided for this unit may not work correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, set the dimmer mode to "DIMMER ON" or "DIMMER OFF."
Controlling the volume automatically (Audio Cruise
Mode)
You can select the proper cruise mode for your car.
This unit changes the volume level automatically (at 3 possible levels) based on the driving
speed of your car by detecting the alternator's generating frequency (Audio Cruise).
If you want to use this mode, follow the procedures below. When shipped from the factory, this
mode is set to "CRUISE OFF."
• CRUISE 1: Select this if your car is relatively quiet.
• CRUISE 2: Select this if your car is relatively loud.
The volume increase rate is twice as much as that of the CRUISE 1
setting.
• CRUISE OFF: Cancels Audio Cruise.
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select "CRUISE MODE" with
3. Select the desired mode with the control dial.
The cruise mode changes as follows:
¢ or 4
DIMMER AUTO
DIMMER ON
¢ or 4
CRUISE 1 CRUISE 2
.
DIMMER OFF
.
CRUISE OFF
35