Setup And Installation; Installation And Mounting - Cameo ZENIT Z180 G2 Bedienungsanleitung

MANUAL LOCK FUNCTION
While the option is available to have the spotlight lock itself automatically against unintentional or unauthorized use (see "Settings" -
"Autolock"), it is also possible to lock the controls manually. Hold the UP and DOWN control keys at the same time for approx. 5 seconds.
"LOCKED" will be shown on the display, and you will not be able to make any changes to the spotlight settings via the control fields. To
release the lock, hold the UP and DOWN control keys at the same time for approx. 5 seconds. The display then returns to whichever infor-
mation it had been showing before the lock was applied.

SETUP AND INSTALLATION

Thanks to the double bracket and integrated plastic feet, the spotlight can be placed in a suitable location on a flat surface. When installing
on a crossbeam, use either the folding 16mm TV spigot (A, suitable for the Adam Hall Super clamp) or an omega bracket that is attached
to the device bracket (B). Suitable crossbeam clamp and omega bracket (item no. CLOMEGABRACKET1) are optionally available. Make sure
that the spotlight is firmly attached and secure it using a suitable safety cable on the designated location (C).
Important safety information: Overhead installation requires extensive experience, which includes calculating the limit values
of the working load of the installation material to be used and regular safety inspections of all installation material and spotlights. If
you do not have these qualifications, do not attempt to carry out the installation yourself; contact a professional company.
12
A
C
A
B
B